Stud Finder Scanner – Metal & Stud Detector Free

Stud Finder Scanner – Metal & Stud Detector Free Stud Finder Scanner helps you locate hidden studs, metal, screws, wiring, and pipes inside walls and underground using EMF sensing, deep scan modes, and beep alerts.

Stud Finder Scanner – Metal & Stud Detector Free

Stud Finder Scanner is a handy utility built to help you locate metal inside walls and find hidden studs. It’s designed to detect small items such as studs, metal pieces, and nuts that may be concealed in walls, pipes, the ground, or other hard-to-see areas. Download Stud Finder Scanner to make stud detection faster and easier.

Overview

The app uses your phone’s sensors (including an EMF sensor) to act as a stud finder and help you discover metal and studs behind surfaces like drywall, walls, plaster, and even in the earth. While there are many similar tools available, this one is made to help you quickly find the position of studs and metal when you scan the area.

It’s especially useful for locating studs, metal, and nuts in common areas such as walls, pipelines, and the ground. If you’re wondering where a stud, screw, or metal object is located, this detector is built for that purpose.

Features

• Free metal scan mode — detects copper and black pipe when present.



• Beep alert — once a stud is detected in the wall, the app starts beeping.
• Deep scan mode — identifies objects inside the wall, earth, and plaster.
• Scan direction tip — if you can’t detect an object moving left to right, try scanning up and down.
• Accurate and fast detection for studs and metal.
• Sensor-based scanning — works using a magnetic sensor and a radiation meter.



• Optimized for updated Android phones — works best on devices that support the required sensors.
• Time-saving — helps you complete scanning with less effort.
• Automatic calibration — calibrates anywhere on the wall for more successful results.



• Simple to use — provides easy-to-read values.
• Free download — the stud detector app is available at no cost.
• Quick location — helps find wood, metal, and wires hidden in walls, earth, floors, plaster, and ceilings.

Disclaimer

The detector is intended to work best on updated phones. If it doesn’t perform well on your device, please update your phone and try again.

Highlights

• See-through-wall scanning (for detection purposes)



• Find wood studs in walls
• Cable and stud detection
• Free metal detector on your phone
• Smart metal and stud detection by Antilogics

How to Use

Install the pipe and stud detector app, then bring your phone close to the area you want to check—such as walls, plaster, or the ground. Watch the meter reading on your screen. When the app detects a stud or metal, it will sound an alert and the meter value will change gradually.

The app uses a magnetic sensor and a radiation meter. It’s a smart tool to help you identify other objects inside the wall that you want to detect.

Advantages

• The app works using both EMF and magnetic sensor input. When metal or a stud is detected, you’ll hear a beep and see the meter value shift.
• With deep scan, it helps point out the location of studs and can help you find more objects inside walls and the earth.
• If you want to locate and detect studs, try Stud Finder Scanner and the Metal & Stud Detector Free app. Move your phone around the area you want to scan and make sure your Android device is up to date—this tool performs best on phones with built-in support for the needed sensors.

Start scanning to detect hidden studs or metal in walls and the earth. The smart features of the stud finder and metal detector app are made to make your detection task easier.